STFC400 Motor for Shield Machine

STFC series hydraulic motors are based on the advantages of static pressure balance of crankshaft and connecting rod type hydraulic motors at home and abroad, through continuous test, improvement and improvement. This series motor shell has high strength and large bearing capacity of internal dynamic components. Due to the form of static pressure balance, internal friction is reduced, thus reducing heat generation and associated negative effects.

STFC series hydraulic motors can be widely used in the hydraulic transmission system of plastic machinery, ship deck machinery, mining construction machinery, lifting and transportation equipment, heavy metal treatment machinery, oil and coal mining machinery, machine tools, light industry equipment, drilling and other machinery. Especially used in screw drive of injection molding machine, lifting capstan, drum drive, drive of various rotary machinery and other transmission machinery.

Product features

· Due to the design of static pressure balance of plunger, connecting rod and eccentric sleeve, the friction force between connecting rod and eccentric sleeve and the lateral force of plunger body are reduced, and the contact specific pressure of ball hinge pair is reduced, which all reduce the friction loss in the transmission process. Therefore, STFC series hydraulic motors have the characteristics of high mechanical efficiency and high starting torque (mechanical efficiency above 0.90 when starting);

· The axial valve with static pressure balance technology prevents the tilt of the valve, has good sealing performance and less leakage, and can work continuously under high pressure (higher pressure up to 29MPa);

· The sealing ring adopts special material and structure to reduce leakage and improve volume efficiency;

· The main transmission parts of the motor adopt special materials and advanced heat treatment process to improve the overall service life;

· The shape and installation size of this series of motors are basically the same as the original Staffa, and the performance parameters are similar to the original Staffa, so it is the ideal choice to replace the imported Staffa motors.

Cleaning process for oil motor

Hydraulic torque converter manufacturers in the real is really put into use before generally must be cleaned, cleaning is also to remove residual environmental pollution chemicals in 3000 RPM hydraulic motor. Metallic shavings. Synthetic fibre compounds. Transformer cores, etc., can cause a series of common problems, if not completely damage the motor, in the progressive two-hour operation. Therefore, the following steps must be followed to remove the main oil channel of the motor:

1. Hydraulic transmission system motor manufacturers clean the vehicle tank with an easy-to-dry cleaning saturated solution and remove the organic solution residue with filtered steam body.

2. Push the oil motor manufacturer to remove all the pipes of the motor. In some cases, it is necessary to prepreg the pipes and sockets.

3. Oil filter on the pipeline to maintain the pipeline and the working pressure pipeline brought by the valve.

4. Place a cleaning plate on the collector to replace precision machined valves, such as electro-hydraulic servo valves.

5. Check that all piping specifications and models are appropriate and properly connected. High speed and high torque hydraulic motors need special attention.

Hot tags: motor for shield machine, China, Customized, manufacturers, suppliers, for sale, in stock, factory, price