Detailed description of orbital motor application of six common problems

Cycloid hydraulic motor in use we often encounter different problems, but because the motor operating standards are unique, it is also the application of six unique must pay attention to. First, when it is necessary to start the application with full load, it should be noted that the starting torque of cycloid hydraulic motor is short. Now many A2FE series hydraulic motor customers have this kind of doubt, cycloid hydraulic motor in the whole process of application what are the common problems, according to this problem, our staff carried out the following description.

When it is necessary to start with full load, it should be noted that the starting torque of cycloid hydraulic motor is short. Because the cycloid hydraulic motor starting torque is shorter than the rated torque

Cycloid hydraulic motor in the use of we often encounter different problems, but because the cycloid hydraulic motor operating standards are unique, it is also the application of six unique must pay attention to.

First, when it is necessary to start the application with full load, it should be noted that the starting torque of cycloid hydraulic motor is short. Because the cycloid hydraulic motor starting torque is shorter than the rated torque, if ignored, may make the work unit difficult to run.

Two, because the back pressure of the cycloid hydraulic motor is higher than the atmospheric pressure, the discharge pipeline of the motor must be directly led back to the oil tank, and can not be connected with the cycloid hydraulic motor return pipeline.

Three, because the cycloid hydraulic motor will always leak, so the cycloid hydraulic motor into and out of the entrance to start braking, it will still appear to move slowly, when must brake for a long time, should be set to avoid rotation of the brake.

Four. When the inertia force of the pushed parts is large (the inertia moment is large or the speed ratio is high), if it is stipulated that the braking or the case and the train are achieved in the short term, the valve (cache valve) should be set in the oil return channel to avoid the large impact of the hydraulic press resulting in the destruction of safety accidents.

Five. When the cycloid hydraulic motor is used as the driving force of lifting or moving equipment, it should set the limit network speed valve as far as possible to prevent the lifting object from falling fast or the car and other lifting mechanism from overspeed, resulting in major accidents.

Vi. When applying quantitative analysis motor, if it is expected to start and park statically, the necessary working pressure control or flow monitoring method should be adopted in circuit design.