General high torque hydraulic motor under radial and axial force conditions

General high torque hydraulic motor bearing radial force and axial force: the external five-star hydraulic motor can bear higher radial force and radial load, which is the external five-star hydraulic motor is chosen by cone roller bearings. Customers in the model selection must be installed axial force can choose the five star hydraulic motor. Pendulum cylinder radial piston pump hydraulic motor is selected cylindrical roller bearings, so the hydraulic motor only installed radial load, and can not be installed axial force. QJM series of low-speed and large torque hydraulic motor works on its own oil distribution shaft, so the hydraulic motor can not bear axial force and radial force, only the output of pure torque, the hydraulic motor must rotate the shaft with rolling bearings fixed when assembled. BM series cycloid hydraulic motor spindle bearing is equipped with angular contact ball bearing, so the small hydraulic motor bears a certain bearing and radial force. In addition, 2K series products choose cone roller bearing support point design scheme, with a large radial bearing capacity and a certain radial load, so that the hydraulic motor can immediately promote the work of the organization.

The above several types are common hydraulic motors in the formulation of rolling bearings, but also because of the different selection of rolling bearings so that all kinds of hydraulic motors on the push under the axial force and radial force is not the same, customers should pay attention to this provision in the selection of models.

HZW series radial piston pump hydraulic motor (outer five star) can install higher radial force and axial force; HZH series of products swing cylinder radial piston pump hydraulic motor (inner five star) can bear relatively large radial force, but can not bear radial load; QJM series hydraulic motors can not withstand all radial and axial forces; BM series cycloid hydraulic motor can bear certain axial force and radial force; 2K series cycloidal hydraulic motors can withstand relatively large axial force and a certain radial force.