The series 6 are used for oblique axial tapered plunger elements in open and closed circuits

A2FO plug type quantitative motor is a type of oblique shaft motor equipped with an axial conical plunger rotating body.

The series 6 are used for oblique axial tapered plunger elements in open and closed circuits

Hydraulic rotator FRB 30F is cost-effective solution generally for seasonal use in forestry, road and building construction, general cargo and material handling.

Lightweight cost-effective solution suitable for ATV

(All Terrain, small agricultural and forestry Vehicles).

Knuckle joint form factor:

Upper connection - EYE

Lower connection - AXLE, to be built in grapple.

Rotator's upper mount is applied in FLANGE form factor. Rotator commonly is used for rigid mounting on the crane tip or in assembly with tilt equipment.

Features are as follows: small volume, large power, stable speed, with a large load, the maximum static load 3OKN, large working pressure, the maximum pressure can reach 25MPA.

GRS stands for Grapple Rotator for Saw, solution with extra channels

Upper connection - FORK form factor of the knuckle joint

Lower connection - FLANGE (to be mounted on the grapple)

Link or knuckle joint Link XR1 is designed to withstand loads up to 5.5t. Link XR1 is made from shock and deformation resistant forged steel. Links are the common way to connect crane tip with rotator and grapple or other tool. In any kind of market segments - forestry, agricalture general material handling - Xin&Can links are, probably, the best solution.

XYJ series hydraulic winch is composed of various integrated valve blocks, hydraulic motors, brakes, planetary reducer, winding, racks and clutches with one-way balance valve and high pressure shuttle valve controlling brake.

Features are as follows: small volume, large power, stable speed, with a large load, the maximum static load 3OKN, large working pressure, the maximum pressure can reach 25MPA;

Features are as follows: small volume, large power, stable speed, with a large load, the maximum static load 3OKN, large working pressure, the maximum pressure can reach 25MPA;

Features are as follows: small volume, large power, stable speed, with a large load, the maximum static load 3OKN, large working pressure, the maximum pressure can reach 25MPA;

Features are as follows: small volume, large power, stable speed, with a large load, the maximum static load 3OKN, large working pressure, the maximum pressure can reach 25MPA;

Features are as follows: small volume, large power, stable speed, with a large load, the maximum static load 3OKN, large working pressure, the maximum pressure can reach 25MPA;

arm length(m) 5.2m (A telescopic arm)
Lifting capacity at 2 m(kg) 1800kg
Column rotation torque(KN.m) 11KN.m
Column Slewing structure Flange type+welded box rack oil cylinder slewing support 《Gear+rack adopts local carburization process》
number of rotating cylinders(pcs) 4

Range 5.5-5.8m （One Tele）
Lifting force at crane nose at reach 2M 1800kg
5.8M 650kg
Column torque 11 KN. m

Extended arm length 6.8m（One-section telescopic arm）
Catch weight at 2m arm span 2800kg
Column rotation torque 13KN.m
Column rotary structure Flange type + welded box rack cylinder slewing bearing"Gear + rack adopts partial carburizing process"

Arm extension length 7.8m （Two telescopic arms）
Grab weight at arm span of 2 meters 2800kg
Column rotation torque 13KN.m